Clavia c1 Guida Utente

19

5

Set program change mode

Normally program change messages are sent via MIDI 
OUT on the channels specified by the UPPER, LOWER 
and BASS channel settings in the MIDI menu. This way 
your external device will receive program change mes-
sages and follow as you change programs.

By setting the Program Change Mode to “Off” or 
“Receive” your external device will not follow as you 
change programs.

6

Turn off all drawbars for the selected manual

By doing this no sound is generated internally.

7

Play!

When recording MIDI in a sequencer you need to keep 
track of the MIDI channel setting for 

UPPER

, 

LOWER

 and 

BASS

, below referred to as “keyboard”.

• Use channel settings 1 -16 for each keyboard individu-

ally. This it the default setting. 

• Never set the keyboards to the same channel. 

Note: The default behaviour of many sequencer applica-
tions is to merge incoming data into one MIDI channel. For 
the correct behaviour set the MIDI channel setting of your 
sequencer program to OMNI, sometimes also describes as 
“Any” or “All”. Please refer to the documentation of your se-
quencer software for more information.

• Use channel settings E1 - E9. This setting will use the 

keyboards normal trigger response, and incorporate 
velocity sensitive data. When using this setting, 

MIDI IN

 

is disabled for the selected keyboard.

Please refer to “The Keyboard” on page 5 for more informa-
tion.

A driver is not needed for computers running OS X operat-
ing systems. The Windows USB driver is compatible with 
the following Windows versions:

• Windows 2000
• Windows XP (x32 and x64 versions)

1

Connect a USB cable between the unit and 
your computer

 The “Found New Hardware” wizard should appear. Fol-
low the on-screen instructions. 

USB-cable is an accessory item and sold separately.

OS upgrades can be found at www.clavia.se when availa-
ble. 

The currently installed OS version is shown in the 

DISPLAY

 at 

power up.

1

 Download the latest OS version

2

Connect a USB cable between the unit and 
your computer

3

Un-compress and run the downloaded appli-
cation

Wait for the application to find your instrument. Click 
the UPDATE button. The progress bar will show you 
when the update is finished.

Program Sysex Dumps can be used for storing a single pro-
gram (Dump One) or the complete program bank (Dump 
All) including Live 1 and Live 2 on an external device such 
as a computer, or for transferring program data between 
two units.

• For sending program Sysex messages, please refer to 

• MIDI Sysex data will be received regardless of MIDI 

channel setting.

• For a Dump All to be received, Memory Protect must be 

turned off. Please refer to “The System Menu” on 
page 15.

• A Dump One will be received regardless of Memory 

Protect setting, but needs to be stored in order to not 
get lost.

• While Program Sysex messages are received, the dis-

play will indicate “

RCV

” in a flashing manner.