Clavia c1 Guida Utente

5

The Nord C1 Combo Organ front panel consists of 3 sec-
tions:

The Organ Section features three different organ models, 
and this is where you select what model to play and make 
model specific adjustments. Please refer to “The Organ 
Section” on page 9.

The Effect Section is where you set and adjust settings for 
delay, drive, EQ, unison, reverb and speaker simulation. 
Please refer to “The Effect Section” on page 13.

The Program Section is where you store and recall sound 
settings into Programs, and also adjust system specific pa-
rameters. Please refer to “The Program Section” on page 8.

The 

MASTER LEVEL

 knob controls the overall 

output level for all audio outputs, including 

HIGH LEVEL OUTPUT

 and 

HEADPHONE 

out-

put. The 

MASTER LEVEL

 knob’s physical posi-

tion is always the same as the output level.

The Nord C1 Combo Organ keyboards have a fast trigger 
response which closely mimics the feel and response times 
of a real organ. The fast trigger response is not velocity sen-
sitive, which might not be preferable when using external 
sound sources. Please refer to “Playing an external sound 
source” on page 18.

The knobs are of potentiometer type. Ex-
cept for the 

MASTER LEVEL

 knob, this means 

that when you load a Program the values of 
the parameters can be totally different 
from the knobs physical positions. As soon as you begin 
turning a knob, the parameter value will ‘snap’ to the 
knob’s physical position. 

Buttons have different behaviour depending on their func-
tionality:

Press the Selector button repeatedly to se-
lect between options printed next to the 
corresponding LEDs. Note that some op-
tions are selected by lighting several LEDs 
simultaniously. 

The On/Off buttons have a LED next to 
them to indicate the status.

Some buttons have a secondary 
function, available by holding 

SHIFT

 

while pressing the button. The 
name of the secondary function is 
printed just below the button.

By pressing the 

SHIFT

 + 

UNISON MODE

 buttons all sounding 

notes will be silenced.

Note: equipment connected via 

MIDI OUT

 is not affected.