Alphasmart neo 2 Guida All'Installazione Rapida

. . . . .

Follow these steps to install the AA batteries:

1. On the back of the NEO 2, put your thumbs in the circles 

 and slide the 

compartment cover toward the left to remove it from the NEO 2.

Note: After you install the batteries the first time, you may use a small 
Phillips screw to secure the cover. If you do this, you will need to remove 
the screw to open the cover the next time you install batteries.

2. The first time you open the compartment, you’ll find a small plastic bag 

with a Phillips screw to help keep the battery compartment shut. Remove 
the bag.

3. Insert the three AA batteries into the compartment. Make sure the + end 

of each battery points toward the black and red cables.

4. Put the battery compartment cover back on and slide it back in place. You 

can insert the small Phillips screw in the hole in the cover to make sure 
the cover stays shut.

of the batteries and connect 
the cable on the battery pack 
to the matching cable next to 
the NEO 2 battery 
compartment. Then, connect 
the AC adapter to your NEO 2 
and plug it into an outlet as 
soon as possible after 
receiving the NEO 2. Charge 
the unit for at least 16 hours 
the first time; charge it 4–8 
hours subsequent times. For 
more information, see the 
NEO 1 and NEO 2 User 
Manual on your NEO 1 and 
NEO 2 Documentation CD.

Neo2QuickGuide.book  Page 3  Thursday, September 11, 2008  8:24 AM