Canon MF3010 Guida Utente
1
•
Always grasp the power plug when unplugging the power plug. Do not
pull on the power cord, as this may expose the core wire of the power
cord or damage the cord insulation, causing electricity to leak, resulting
in a fire or electrical shock.
pull on the power cord, as this may expose the core wire of the power
cord or damage the cord insulation, causing electricity to leak, resulting
in a fire or electrical shock.
•
Leave sufficient space around the power plug so that it can be
unplugged easily. If objects are placed around the power plug, you may
be unable to unplug it in an emergency.
unplugged easily. If objects are placed around the power plug, you may
be unable to unplug it in an emergency.
WARNING
•
Do not disassemble or modify the machine. There are high-temperature
and high-voltage components inside the machine which may result in a
fire or electrical shock.
and high-voltage components inside the machine which may result in a
fire or electrical shock.
•
Electrical equipment can be hazardous if not used properly. Do not allow
children to touch the power cord, cables, internal gears, or electrical parts.
children to touch the power cord, cables, internal gears, or electrical parts.
•
If the machine makes an unusual noise or emits smoke, heat, or an unusual
smell, immediately turn off the power switches of the machine and
computer and disconnect the interface cable if it is connected. Then, unplug
the power plug from the AC power outlet and contact your local authorized
Canon dealer. Continued use can result in a fire or electrical shock.
smell, immediately turn off the power switches of the machine and
computer and disconnect the interface cable if it is connected. Then, unplug
the power plug from the AC power outlet and contact your local authorized
Canon dealer. Continued use can result in a fire or electrical shock.
•
Do not use flammable sprays near the machine. If flammable substances
come into contact with electrical parts inside the machine, this may
result in a fire or electrical shock.
come into contact with electrical parts inside the machine, this may
result in a fire or electrical shock.
•
Always turn off the power switches of the machine and computer, and
then unplug the power plug and interface cables before moving the
machine. Failure to do so can damage the cables or cords, resulting in a
fire or electrical shock.
then unplug the power plug and interface cables before moving the
machine. Failure to do so can damage the cables or cords, resulting in a
fire or electrical shock.
•
Confirm that the power plug or power connector is inserted completely
after moving the machine. Failure to do so can result in an overheating
and fire.
after moving the machine. Failure to do so can result in an overheating
and fire.
•
Do not drop paper clips, staples, or other metal objects inside the
machine. Also, do not spill water, liquids, or other flammable substances
(alcohol, benzene, paint thinner, etc.) inside the machine. If these items
come into contact with a high-voltage area inside the machine, this
may result in a fire or electrical shock. If these items are dropped or
spilled inside the machine, immediately turn off the power switches of
the machine and computer and disconnect the interface cable if it is
connected. Then, unplug the power plug from the AC power outlet and
contact your local authorized Canon dealer.
machine. Also, do not spill water, liquids, or other flammable substances
(alcohol, benzene, paint thinner, etc.) inside the machine. If these items
come into contact with a high-voltage area inside the machine, this
may result in a fire or electrical shock. If these items are dropped or
spilled inside the machine, immediately turn off the power switches of
the machine and computer and disconnect the interface cable if it is
connected. Then, unplug the power plug from the AC power outlet and
contact your local authorized Canon dealer.
•
When plugging or unplugging a USB cable when the power plug is
plugged into an AC power outlet, do not touch the metal part of the
connector, as this can result in electrical shock.
plugged into an AC power outlet, do not touch the metal part of the
connector, as this can result in electrical shock.
CAUTION
•
Do not place heavy objects on the machine. The object or the machine
may fall, resulting in personal injury.
may fall, resulting in personal injury.
•
Turn off the power switch when the machine will not be used for a long
period of time, such as overnight. Turn off the machine and unplug the
power plug if the machine will not be used for an extended period of
time, such as for several days.
period of time, such as overnight. Turn off the machine and unplug the
power plug if the machine will not be used for an extended period of
time, such as for several days.
•
Open or close covers and install or remove cassettes gently and carefully.
Be careful not to hurt your fingers.
Be careful not to hurt your fingers.
•
Keep your hands and clothing away from the roller in the output area.
Even if the machine is not printing, the roller may suddenly rotate and
catch your hands or clothing, resulting in personal injury.
Even if the machine is not printing, the roller may suddenly rotate and
catch your hands or clothing, resulting in personal injury.
•
The output slot is hot during and immediately after printing. Do not
touch the area surrounding the output slot, as this may result in burns.
touch the area surrounding the output slot, as this may result in burns.
•
Printed paper may be hot immediately after being output. Be careful
when removing the paper and aligning the removed paper, especially
after continuous printing. Failure to do so may result in burns.
when removing the paper and aligning the removed paper, especially
after continuous printing. Failure to do so may result in burns.
•
When performing copy with a thick book placed on the platen glass, do
not press the platen glass forcefully. This may damage the platen glass
and cause personal injury.
not press the platen glass forcefully. This may damage the platen glass
and cause personal injury.
•
Be careful not to drop a heavy object, such as a dictionary, on the platen
glass. This may damage the platen glass and cause personal injury.
glass. This may damage the platen glass and cause personal injury.
•
Close the platen glass gently so as not to catch your hand. This may
result in personal injury.
result in personal injury.
•
The laser beam can be harmful to the human body. The laser beam is
confined in the laser scanner unit by a cover, so there is no danger of
the laser beam escaping during normal machine operation. Read the
following remarks and instructions for safety.
confined in the laser scanner unit by a cover, so there is no danger of
the laser beam escaping during normal machine operation. Read the
following remarks and instructions for safety.
• Never open covers other than those indicated in this manual.
• Do not remove the caution label attached to the cover of the laser scanner unit.
• If the laser beam should escape and enter your eyes, exposure may cause
damage to your eyes.
•
If you operate this machine in manners other than the control,
adjustment, and operating procedures prescribed in this manual, this
may result in hazardous radiation exposure.
adjustment, and operating procedures prescribed in this manual, this
may result in hazardous radiation exposure.
•
This machine is confirmed as the class 1 laser product in IEC60825-1:2007.
•
When cleaning the machine, turn off the machine and computer, and
unplug the interface cables and power plug. Failure to do so can result in
a fire or electrical shock.
unplug the interface cables and power plug. Failure to do so can result in
a fire or electrical shock.
•
Unplug the power plug from the AC power outlet periodically and clean
the area around the base of the power plug’s metal pins and the AC
power outlet with a dry cloth to remove all dust and grime. In damp,
dusty, or smoky locations, dust can build up around the power plug and
become damp, which can cause a short circuit, resulting in a fire.
the area around the base of the power plug’s metal pins and the AC
power outlet with a dry cloth to remove all dust and grime. In damp,
dusty, or smoky locations, dust can build up around the power plug and
become damp, which can cause a short circuit, resulting in a fire.
•
Clean the machine with a well wrung out cloth dampened with water or
mild detergent diluted with water. Do not use alcohol, benzene, paint
thinner, or other flammable substances. If flammable substances come
into contact with electrical parts inside the machine, this may result in a
fire or electrical shock.
mild detergent diluted with water. Do not use alcohol, benzene, paint
thinner, or other flammable substances. If flammable substances come
into contact with electrical parts inside the machine, this may result in a
fire or electrical shock.
Handling
Maintenance and Inspections
Connecting to a Computer and
Installing the Drivers
Preface
1
Installing the Machine
2
3
Appendix
Before Using the Machine