Canon MP500 Guida Utente

Pagina di 153
Chapter 1 
19
Before Printing
Turning the Machine ON and OFF
Turn on the machine before starting printing.
„ Turning on the Machine
Before turning on the machine, confirm that the Print Head and ink tanks are set into place.
1
Press [ON/OFF].
[COPY] flashes green for a while, and then turns on.
„ Turning off the Machine
1
To turn off the machine, press [ON/OFF].
The machine is off when the currently selected Mode Lamp (e.g. [COPY]) stops flashing and 
all Operation Panel lamps are off.
Note
If preparatory operations above are not yet finished, follow the Easy 
Setup Instructions
 to complete them.
Note
z If the Alarm Lamp flashes orange and an error message is displayed 
on the LCD, see 
“An Error Message is Displayed on the LCD” on 
page 105
.
z The LCD goes out if the machine is not operated for 5 minutes. Press 
any button to restore the display.
Important
When removing the power plug after turning off the machine, be sure to 
check that all the lamps on the Operation Panel are not lit. If the power 
plug is removed from the wall outlet with the lamps on the Operation 
Panel lit or blinking, the machine cannot protect its Print Heads and may 
be unable to print.
See
“Keeping the Best Printing Results” on page 93
.