Canon ZR600 Manuale Istruttivo

Pagina di 131
73
E
d
it
in
g
E
Recording from Digital Video 
Devices (DV Dubbing)
You can record from other digital video devices equipped with a DV terminal with virtually 
no loss in picture and sound quality.
1. Connect the camcorder to the digital video device.
See Connecting a Digital Video Device  (
 
70).
2. Set the camcorder to 
 mode and load a blank cassette.
 Make sure that [AV
DV] is set to [OFF] (
 75).
3. Connected device: Load the recorded cassette or disc.
4. Open the FUNC. menu, select (
) the recording 
pause icon 
 and press 
(
)
.
5. Select (
) [EXECUTE] and press (
).
In record pause and during recording, you can check the picture 
on the screen.
6. Connected device: Play back the tape or disc.
7. If the joystick guide does not appear on screen, 
press
(
) to display it.
8. Push the joystick (
) towards 
/
 when the scene 
you wish to record appears.
• Recording starts.
• Push the joystick (
) towards 
/
 again to pause/resume the recording.
9. Push the joystick 
(
)
 towards 
 to stop recording.
10.Connected device: Stop playback.
 Blank sections may be recorded as anomalous picture.
 If the picture does not appear, reconnect the DV cable or turn the camcorder off 
and back on again.
 You can only record video signals from devices with the 
 logo from 
recordings in SD (standard definition) standard, in SP or LP recording mode. 
Note that signals from identically shaped DV (IEEE1394) terminals may be in 
different video standards.
We recommend powering the camcorder from a household power source.
Copyright Signal
Certain software tapes are copyright protected. If you attempt to play back such tape, 
“COPYRIGHT PROTECTED PLAYBACK IS RESTRICTED” appears and you will not be 
able to view the contents of the tape. If you attempt to record from such tape via the DV 
terminal, “COPYRIGHT PROTECTED DUBBING RESTRICTED” appears and you will 
not be able to record the contents of the tape.