Canon bjc-70 Manuale Utente

N

When printing from an MS-DOS software application, the font selected
from the software application normally overrides the font selected using
the operator panel. You can ensure that the font selected from the operator
panel overrides the MS-DOS application by enabling the Font typeface lock
feature through the FUNCTION settings. See Chapter 9, Customizing the
Printer, for more details.

Your printer includes a Low ink warning function that you can enable
using the FUNCTION settings described in Chapter 9, Customizing the
Printer. When you enable the Low ink warning function, which is
FUNCTION 1A, you must set the printer’s ink gauge.

You set the printer’s ink gauge whenever you install a new BJ cartridge or a
new ink tank. You do not reset the ink gauge when you switch between the
BC-10 and BC-11 BJ cartridges.

N

The Low ink warning function does not work with the cartridge you
installed when you first set up the printer. You can start this function only
after installing your first new ink tank.

When you install a new BC-10 Black BJ cartridge, a new BCI-10 Black ink
tank, or a new BCI-11 Black ink tank, follow these steps:

❏

This tells the printer that a new black ink tank is installed and
resets the black ink gauge.