Canon S330 Istruzione Sull'Installazione

Carefully remove all items from the box.

S330 Series
Color Bubble Jet Printer

Documentation  
and Software Kit

Power Cord

S330 Print Head

Paper Rest

Output Tray

Ink Tanks

BCI-24 Black                      BCI-24 Color

POWER

Lamp

POWER

Button

Serial number

Shipping Tape

Remove the print head from its package.

NOTE: Do not touch the electrical contacts.

Raise the gray lock lever.

Slide the print head into the holder until  
it is securely seated.

Do not press it down.

Lower the lever until it locks into place.

Protective cap

Remove the black ink tank (BCI-24 Black) 
from its packaging and pull off the orange  
protective cap.

NOTE: To avoid spilling ink, do not touch the 

bottom of the tank once you have removed  
the protective cap.

Insert the black ink tank into the slot on  
the right. Press down until the ink tank  
locks into place.

Repeat the procedure for the color ink tank 
(BCI-24 Color), inserting it into the remaining 
slot.

Close the front cover and attach the 
paper rest and output tray.        

Turn the printer off.

Connect one end of a USB cable (not  
included) to the computer, the other to  
the printer.

IMPORTANT: Be sure printer is  
off before continuing, or the  
computer will attempt to install  
the printer driver before the  
printer is ready.

USB Port

USB Cable

Turn the print head over, then remove  
the orange protective cap. 

Electrical contacts

Open the front cover. The print head holder
automatically moves to the center.

Press the POWER button.

Plug the power cord into the back of the  
printer and connect the other end to a  
power outlet.

Remove the shipping tape from the front  
and sides of the printer. 

Write down the serial number located to 
the right of the print head. You will need 
this later to register the product.

1

2

3

4

5

1

5

4

3

1

2

1

2

3

4

1

2