LXE hx3 Guida Di Riferimento

144 

Barcode Tab 

HX3 Reference Guide  

E-EQ-HX3RG-C 

Factory Default Settings 

Enable Code ID 

None 

Continuous Scan Mode 

Disabled 

Timeout between same symbol 

1.0 seconds 

The Scanner application (Wedge) can only enable or disable the processing of a barcode inside 
the Wedge software.  

The Scanner application enables or disables the Code ID that may be scanned.  

Enabling or disabling a specific barcode symbology is done manually using the configuration 
barcode in the Linked Scanner Programming Guide (available on the LXE Manuals CD and the 
LXE ServicePass website).  

Choose an option in the Enable Code ID drop-down box: None, AIM ID, Symbol ID, or Custom 
ID. 

 

Symbology 
Settings 

Individually enable or disable a barcode from being scanned, set the minimum 
and maximum size barcode to accept, strip Code ID, strip data from the 
beginning or end of a barcode, or (based on configurable Barcode Data) add a 
prefix or suffix to a barcode before transmission. 

Ctrl Char 
Mapping 

Define the operations the LXE Wedge performs on control characters (values 
less than 0x20) embedded in barcodes.  

Custom 
Identifiers 

Defines an identifier that is at the beginning of barcode data which acts as a 
Code ID. After a Custom Identifier is defined, Symbology Settings can be 
defined for the identifier just like standard Code IDs. 

 

See Also:  Barcode Processing Overview earlier in this chapter.