Canon LBP-2410 Guida Utente
Installing the Network Board (AXIS 1611)
6-16
Optional Equipment
6
8
Connect the power cord and all interface cables.
9
Press the power switch to turn the printer ON.
10
Confirm that the Power lamp on the network board is
illuminated.
illuminated.
Removing the Network Board
Remove the network board in the following procedure. Have available the protective
plate and screws of the expansion board slot that was removed when the network
board was installed.
plate and screws of the expansion board slot that was removed when the network
board was installed.
CAUTION
•
Be sure that the printer is OFF, and that all interface cables and power cord are
disconnected. Replacing with the power ON or cables and wires connected may
result in an electrical shock.
disconnected. Replacing with the power ON or cables and wires connected may
result in an electrical shock.
•
Be careful when handling the network board. Touching the edges or the sharp
portion of the network board may result in personal injuries.
portion of the network board may result in personal injuries.
Power lamp