Canon LBP-2410 Guida Utente
Installing the CAPT Software
3-4
Setting Up the Pr
inting En
vironment
3
Installing the CAPT Software
This section describes the procedure for installing the CAPT software when
connecting this printer to the computer with a USB cable.
connecting this printer to the computer with a USB cable.
IMPORTANT
The CAPT software is required for printing with this printer. Be sure to install the CAPT
software.
software.
NOTE
When using this printer on a network, see "Connecting the Printer with the Printer
Sharing Function on a Network," on p. 3-56.
Sharing Function on a Network," on p. 3-56.
For Windows 98/Me
The screens used are for Windows 98.
Installing from the CD-ROM
IMPORTANT
Do not connect the USB cable before the installation. The installation will be failed.
Connect the USB cable at the appropriate point during the installation (Step 10
Connect the USB cable at the appropriate point during the installation (Step 10
➞
1
Press the power switch to turn OFF the printer.
2
Turn on the computer and start up Windows 98/Me.
3
Insert the "User Software for LBP-2410" CD-ROM into the
CD-ROM drive.
CD-ROM drive.
If the CD-ROM is already in the drive, take it out and insert it again.
The CD-ROM Menu will appear automatically.
IMPORTANT
If the CD-ROM Menu does not appear automatically, select [Run] under the [Start]
menu, enter "D:\English\CNAC1MNU.exe", and click [OK].
(The CD-ROM drive name is indicated as "D:" in this manual. The CD-ROM drive
name may differ depending on the computer being used.)
menu, enter "D:\English\CNAC1MNU.exe", and click [OK].
(The CD-ROM drive name is indicated as "D:" in this manual. The CD-ROM drive
name may differ depending on the computer being used.)