GE jx2127sh Istruzione Sull'Installazione

Trim Frame

1

Bottom Duct

1

Top Bracket

1

Phillips Round-Head

24

Screws (22 

required 

for installation)

Phillips Flat-Head  

5

Screws 

(4 required for 

installation)

Anti-Tip Bracket 

1

Bottom Bracket 

1

Template

1

or

Visit our Website at:

Save these 

instructions for local inspector’s use.

Observe all 

governing codes and ordinances.

Be sure to leave these

instructions with the Consumer.

Keep these instructions

for future reference.

• For easier installation and personal safety, we

recommend that two people install this microwave oven.

• Unplug the microwave oven before attempting

installation of this kit.

• Skill level – Installation of this appliance requires basic

mechanical and electrical skills.

• Completion time – 1-3 hours
• Proper installation is the responsibility of the installer. 
• Product failure due to improper installation is not

covered under the Warranty.

• This kit is UL listed for installation alone or over 

any General Electric/Hotpoint/RCA single electric
wall oven.

#2 Phillips screwdriver

Pencil

Tape measure

Awl or punch

Drill with 

7

⁄

64

″ bit or #35

Before beginning the

installation, switch power off at service panel and lock
the service disconnecting means to prevent power
from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten
a prominent warning device, such as a tag, to the
service panel.

Scissors (optional)