Definitive Technology mythos st Guida Utente

Tools required:  4mm (or 

5

/

32

") Allen Wrench (also called Hex Key driver) 

Parts required:   Polished Granite Base, Cable Clip for AC Cord, 

four allen head bolts, eights plastic washers 

Instructions:

1.  Carefully lay the Mythos ST on its side. Lift the base of the speaker about six

inches and support it with a soft padded object, such as a pillow. Do NOT

support the speaker with a hard object, as you might dent or scratch the

aluminum finish.

2. Place one plastic washer on each bolt.

3.  Insert the bolts into the granite base from the same side that the black feet are

attached to.

4. Place another plastic washer on each bolt so the washer is against the granite.

5.  Finger tighten all four bolts into the threaded holes on the bottom of the

Mythos. If this has been done correctly, washers will be between the metal

surface of the Mythos ST, the granite, and the heads of the bolts.

6. GENTLY tighten each bolt with the allen head wrench. Do NOT overtighten 

or you may crack the granite.

The cautionary marking label is located on the bottom of the speaker,

visible through an opening in the granite base.

1. The fuse and power disconnect device are located on the bottom of the

speaker, accessible through a hole in the granite base.

2. The disconnect device is the power cord, detachable at either the speaker

or the wall.

3. The power cord must be disconnected from the speaker before servicing.

Each loudspeaker leaves our plant in perfect condition. Any visible or

concealed damage most likely occurred in handling after it left our plant and

should be reported at once to your Definitive dealer or the delivery company that

delivered your loudspeaker. Please unpack your system carefully. Save all cartons

and packing materials in case you move or need to ship your system. Record the

serial number found on the back of the Mythos ST in the appropriate place on your

warranty card, answer all questions and send it in.