Ricoh 2035e Manuale Utente
Reception Features
94
5
r When the SMTP server attempts to route received documents to this machine
while the machine is transmitting an e-mail, the machine will respond to the
SMTP server with a "busy" signal. Then, the SMTP server usually tries resend-
ing the documents until the set timeout.
SMTP server with a "busy" signal. Then, the SMTP server usually tries resend-
ing the documents until the set timeout.
Reference
p.63 “Auto E-mail Reception”, Facsimile Reference <Basic Features>
p.63 “Manual E-mail Reception”, Facsimile Reference <Basic Features>
p.94 “Routing E-mail Received via SMTP”
p.63 “Manual E-mail Reception”, Facsimile Reference <Basic Features>
p.94 “Routing E-mail Received via SMTP”
Routing E-mail Received via SMTP
E-mail received via SMTP can be routed to other fax machines. It can also be
routed to destinations programmed as Quick Dial entries or Groups.
routed to destinations programmed as Quick Dial entries or Groups.
Preparation
Before routing e-mail received via SMTP, you first must set "SMTP RX File
Delivery Settings" to "On". See p.145 “E-mail Settings” .
Delivery Settings" to "On". See p.145 “E-mail Settings” .
Note
r If an e-mail transfer request is received when the "SMTP RX File Delivery Set-
tings" to "Off", this machine responds with an error message to the SMTP
server.
server.
r You can make settings that limit transfer to specified originators. See p.145
r Using this function, you can also send documents from your e-mail software
to e-mail addresses and G3 fax machines' destinations through this machine
simultaneously. For details about specifying the destinations of fax machines,
see the following.
simultaneously. For details about specifying the destinations of fax machines,
see the following.
GFIFAX4E
This machine
E-mail: aaaa@abc.company.com
FAX No:212-123-5678
E-mail: aaaa@abc.company.com
FAX No:212-123-5678
GFIFAX4E.eps