Ricoh 2035e Manuale Utente
Using Key Operator Settings
157
9
Forwarding Mark
You can print a Forwarding Mark on
the receiver's messages that have
been forwarded.
The receiver can distinguish between
forwarded messages and usual recep-
tions.
the receiver's messages that have
been forwarded.
The receiver can distinguish between
forwarded messages and usual recep-
tions.
Note
r You can specify whether or not to
print a Forwarding Mark in the
User Parameters. See p.159 “User
Parameters” (switch 02, bit 0).
User Parameters. See p.159 “User
Parameters” (switch 02, bit 0).
Memory Lock
When you switch Memory Lock on,
received messages are stored in mem-
ory and not printed automatically.
When a message is received in the
Memory Lock mode, the Confidential
File (i) indicator blinks. To print this
message, enter the Memory Lock ID.
A user without the ID cannot print
the message. This prevents unautho-
rized users from seeing the message.
received messages are stored in mem-
ory and not printed automatically.
When a message is received in the
Memory Lock mode, the Confidential
File (i) indicator blinks. To print this
message, enter the Memory Lock ID.
A user without the ID cannot print
the message. This prevents unautho-
rized users from seeing the message.
Preparation
To use Memory Lock, program the
Memory Lock ID, and then switch
Memory Lock on. See p.183 “Pro-
gramming a Memory Lock ID”.
Memory Lock ID, and then switch
Memory Lock on. See p.183 “Pro-
gramming a Memory Lock ID”.
Note
r To store incoming documents
from Special Senders only in Mem-
ory Lock, program each sender
with “Special Senders to Treat Dif-
ferently”. See p.163 “Special Send-
ers to Treat Differently”.
ory Lock, program each sender
with “Special Senders to Treat Dif-
ferently”. See p.163 “Special Send-
ers to Treat Differently”.
A
Press the {User Tools/Counter} key.
B
Press
[
Facsimile Features
]
.
C
Press
[
Key Operator Tools
]
.
D
Press
[
Memory Lock RX
]
.
E
Select
[
ON
]
or
[
OFF
]
, and then
press
[
OK
]
.
Note
r To cancel this setting, press
[
Cancel
]
. The display returns to
that of step
F
Press the {User Tools/Counter} key.
The standby display appears.
The standby display appears.
Gfmten0e.eps
ZHPS180E.eps