Ricoh fax3900l Guida Utente
4
Connecting the
Power and
Switching On
Power and
Switching On
1.
Insert the power cable into the socket
located at the rear of the machine.
located at the rear of the machine.
2.
Plug the cable into a wall socket.
Warning
T Power requirements: 120 V, 60 Hz
T Insert the power plug securely into the wall socket.
T Make sure that the wall outlet is near the machine
and readily accessible.
T Do not connect other equipment to the same socket.
3.
Turn the power switch on.
2.
Connect the other end to your telephone line.
6
Connecting to
the Tele-
phone Line
the Tele-
phone Line
There are two similar sockets located at the rear
of the machine:
of the machine:
TEL1: For the optional handset or external telephone
LINE: For connecting to the telephone line
LINE: For connecting to the telephone line
1.
Insert the line cable into the socket labeled
“LINE”.
“LINE”.
5
5.
If necessary, pull out the extensions on the
Document Table and trays.
Document Table and trays.
Before you can use the fax machine, you must
perform some simple initial settings.
perform some simple initial settings.
SCHMIDT4_EN.pm6
9/18/00, 1:29 PM
4