Cambridge Audio es10 Guida All'Installazione
3 Incognito Exterior speakers
Before installing and routing your wiring, you may wish to test the
speaker setup to check for a good stereo sound in your listening area.
speaker setup to check for a good stereo sound in your listening area.
To m
mount tthe bbracket ffollow tthese ssteps:
1. Unscrew and remove the bracket from the speaker. You can mount
the bracket either horizontally or vertically onto the chosen wall.
2. Ensure the chosen wall or surface is solid, never mount a speaker on
a plasterboard or unreinforced wall.
3. Use the large middle hole to route your wiring (the bracket will cover
the hole in the wall). Use the remaining keyholes to screw your fixings
into the wall.
into the wall.
4. Attach the speaker to bracket and adjust the speaker to face the
listening area.
Please N
Note:
Fixings and screws are not supplied. If you are unsure as to which
fixings are suitable for this bracket and speaker, you should take
professional advice and obtain the correct fixings.
fixings are suitable for this bracket and speaker, you should take
professional advice and obtain the correct fixings.
MOUNTING THE ES10
Cable routing hole