Haier ab142acbac Manuale Utente
10
Installation Guide
Installation of air conditioner (only for reference)
1. Make a wooden frame. (Fig.1)
2. Attach a metal support (not provided by
manufacturer) in a firm location with expanding
screws or bolts.
3. Remove the air conditioner from its packing
carton.
4. Place the air conditioner on the metal support.
5. Stuff gaps in the wall or window with soft
sponge material or rubber gaskets to block
outside noise and keep cool air from escaping.
6.
Lift the back of the machine body slightly.
You can see the drain hole at the back of
the bottom plate. (see Fig. 2).
the bottom plate. (see Fig. 2).
7.
After installation of all the accessories,
put the whole machine on the
metal support
.
If there's water outlet flexible pipe, lead
the pipe to needed position (see Fig.3).
the pipe to needed position (see Fig.3).
Supplied accessory parts.
Model
B
A
Note: After finishing the installation of the air conditioner,
fix the panel board onto the casing with one front
attachment screw and two side attachment screws.
fix the panel board onto the casing with one front
attachment screw and two side attachment screws.
Name
Appearance
Quantity
Manual
1
Side screw
2
Front screw
1
Fig.2
Fig.3
Thickness of wall
Metal support
Fig.1
Wall
670mm
440mm
HW-18C03/R1
Rubber lid
Condenser
A
B
water outlet
flexible pipe
flexible pipe