Nikon 4800 Manuale Utente

39

More on Photography

14

When using the fl ash, be sure that your fi ngers or other objects do not obstruct the 
fl ash window.

Light from the fl ash refl ected from particles of dust or other matter in the air may ap-
pear in pictures as bright specks.  If this occurs, turn the fl ash off or zoom in and try 
again.

The fl ash turns off (

) automatically when BSS is enabled (

 70) or an option other 

than Single is selected for Continuous (

 69).

If the fl ash fi res when the low battery icon is displayed, the monitor will turn off while 
the Speedlight recharges.

When lighting is poor and the fl ash is off (

), the camera will 

automatically increase sensitivity, permitting faster exposures 
and minimizing blur caused by inadvertent camera movement 
(camera shake).  An ISO  icon is displayed to warn that the 
picture may be slightly mottled.

When lighting is poor and the fl ash is off (

), shutter speeds 

will slow and pictures may be blurred.  If the shutter speed 
required for exposure is very slow, a   (camera shake) warning 
be displayed.  Use of a tripod or support is recommended.

Flash range varies with zoom position.  When the camera is zoomed all the way out, the 
fl ash has a range of 0.4 – 4.3 m (1´4˝ – 14´).  The range at maximum zoom is 1.0 –2.6 m 
(3´3˝  – 8´6˝).  As a result, the fl ash may not be able to light the entire subject at distances 
of less than 0.4 m/15.7˝ (widest angle) or 1.0 m/3´3˝  (maximum zoom).  When taking 
close-ups, play each picture back after shooting to check the results.

When the camera is turned on in 

 (auto) mode, the most recent fl ash setting will be 

restored; in other modes, the fl ash will be reset to the default for the selected mode.  
Reset all (

 99) resets the fl ash to AUTO (

 mode) or to the default for the current 

mode (assist and scene modes).

14