Nikon 8400 Manuale Utente

11

First Steps

Do not use the battery at ambient temperatures below 0 °C (32 °F) or above 40 °C 
(104 °F).  During charging, the tem per a ture should be in the vi cin i ty of 5–35 °C (41–
95 °F).  Note that the battery may become hot during use; wait for the battery to cool 
before charging.  Failure to observe these precautions could damage the battery, impair 
its performance, or prevent it from charging normally.

When the battery is not in use, remove it from the camera or battery charger and 
replace the terminal cover.  The camera and battery charger draw minute amounts of 
current even when off; if left in place, the battery could be drained to the point that it 
no longer functions.  Turn the camera off before removing or inserting batteries.  To 
remove the battery, open the battery-chamber cover as described in Step 2, above, and 
slide the battery out.  Note that the battery may become hot during use; observe due 
caution when removing the battery.

To power the camera continuously for extended periods, use 
an  EH-54 AC adapter (available separately; 

 143).  Do not, 

under any circumstances, use another make or model of 
AC adapter.  Failure to observe this precaution could result in 
overheating or in damage to the camera.

To remove the battery-chamber cover when using the optional 
MB-CP10 battery pack, open the cover, press it down (

햲) and 

twist it off as shown (

햳).

Replace the battery-chamber cover when the battery pack is 
not in use.  To replace the cover, insert one corner and press 
down while rotating the cover as shown until it clicks into 
place.

Used batteries are a valuable resource.  Please recycle used batteries in accordance with 
local regulations.