Nikon P6000 Guida Utente

Pagina di 220
149
Shooting Options: The Shooting Menu
S
h
ooti
n
g
, Pl
ay
back 
and S
e
tup M
e
nus
X Wide-angle Converter
This option is for use with the Step-down Ring Adapter UR-E21 (available separately 
from Nikon) to attach the converter lens WC-E76 (available separately from Nikon) 
listed below.
For more information on attaching the wide-angle converter, see “Wide-angle 
Converter”
 (
A179) of this manual. For more information on using the wide-angle 
converter, see the user’s manual provided with the wide-angle converter lens.
B
Notes on Attaching the Wide-angle Converter for Shooting
• Set Wide-angle converter to On before shooting. Set Wide-angle converter to None when no 
converter lens is attached.
• The built-in flash is changed to W (off ) when Wide-angle converter is set to On. Use flash units 
A180), available separately from Nikon) to shoot with the flash.
• Continuous flash cannot be used for Continuous (
A140).
• Using the flash units (available separately from Nikon) to shoot at wide angle may cast shadows in 
the pictures shot. Check the picture using the monitor after shooting. A wide panel is 
recommended when shooting with the Speedlight SB-600, SB-800 or SB-900.
• AF Assist cannot be used with Wide-angle converter is set to On.
D
More Information
A148) for more information.
X
On
Use with the Wide-angle Converter WC-E76. When selecting this option, the camera 
is zoomed out to the maximum wide-angle position.
Enjoy wide-angle shooting at a focal length of roughly 21mm (0.8 in.) (equivalent 
with 35mm [135] picture angle) when Distortion control is set to Off and the 
camera is zoomed out to the maximum wide-angle position. The full range of optical 
zoom is available, however, by its very nature, best results are achieved with the 
camera zoomed out to the maximum wide-angle position.
Digital zoom is not available.
k
None (default setting)
No modifications made to camera settings. Use when no converter lens is attached 
(be sure to remove lens adapter ring).