Nikon D2x Manuale Utente

Copying White Balance from d-0 to Presets d-1 – d-4
To  copy a measured value for white balance 
from d-0 to any of the other presets (d-1 – d-4), 
highlight the destination preset in the thumbnail 
display and press the center of the multi selector 
as described in steps 1–3 on page 63.  The menu 
shown at right will be displayed.

1

 Press the multi selector up or down to high-

light Copy d-0.

Nikon Capture 4 version 4.2 or later (available separately) can be used to edit white 
balance when RAW photographs taken with the D2X are displayed on a computer.  
The edited value can be copied directly to a white balance preset while the camera is 
connected to a computer, or the image can be saved to the camera memory card and 
the white balance value copied using the Select image option in the preset menu.  
Any comments created with Nikon Capture 4 will also be copied to the comment for 
the selected preset.  See the Nikon Capture 4 manual for details.

2

 Press the multi selector to the right to copy 

white balance from d-0 to the selected preset 
and return to the thumbnail display.  If com-
ment has been created for d-0, the comment 
will be copied to the comment for the selected 
preset.