Disc Makers autograph iv Guida Utente

Ink Cartridges and Printable CDs 5

3. Remove the tape covering the cartridges printhead.

DO NOT TOUCH THE COPPER AREA!

4. Press and release the

Ink Cartridge button to move the

carrier to the load position.

5. Insert the ink cartridge into the cartridge carrier, copper

end first.

6. Push the cartridge back until it snaps into place.

7. Close the printers front cover. If you leave the door open,

ambient light can interfere with proper cartridge

initialization.

8. Press and hold the

Ink Cartridge button until the

carriage returns home, then release. This will reset the on

board ink levels.

NOTE: When changing to subsequent new cartridges, refer to Section E.

NOTE: A Spare Ink Cartridge Holder is included with your printer. This

holder provides a convenient place to store an extra ink cartridge and

also prevents an opened ink cartridge from drying out. To use this

holder, simply insert an Ink Cartridge into the holder, copper-end

first, until it snaps into place.

510132r2.qxd 5/30/2001 12:53 PM Page 5

TOC

INDEX