Microtek 120tf Guida Al Funzionamento

8     ArtixScan 120tf Installation and Operation Manual

Before connecting the scanner, check to see if your computer system has a built-in
SCSI interface or an installed SCSI card. If you need help on installing the SCSI card,
please refer to the documentation that came with your SCSI card.

Follow the steps below to make a SCSI connection.

1. Shut down your computer.

2. Set the SCSI ID number to 6. If the SCSI ID number 6 is used by another SCSI

device, check which SCSI ID is free, and set the number to a free SCSI ID from 2
through 5.

3. Connect the scanner to your computer, using the provided SCSI cable.

Connect one end of the SCSI cable to your computer’s SCSI port, and connect the
other end of the cable to the scanner’s SCSI port.

6

+

Push the minus button (-) above the
SCSI ID number to decrease the
number; push the plus button (+) to
increase the number.