Microtek c593 Manuale Utente
ii
Installing The Monitor
Follow these steps to install the monitor,
1.
Before you connect the cables,make sure that the monitor and the
system unit power switches are OFF.
system unit power switches are OFF.
2.
Please follow the following drawing to remove the plastic back over in
order to connect the signal cable and power cable.
order to connect the signal cable and power cable.
3.
Plug one end of the 15pin signal cable to the monitor and the other
end to the video signal connector at the rear of the system. Tighten
the two screws on the cable connector on both ends, otherwise the
screen will be abnormal and LED light is yellow color, not the normal
green color.
end to the video signal connector at the rear of the system. Tighten
the two screws on the cable connector on both ends, otherwise the
screen will be abnormal and LED light is yellow color, not the normal
green color.
4.
Connect the power to the monitor through the AC/DC adapter.
5.
Connect the power cord on the AC outlet, see the below.