Nortel 4000 Guida All'Installazione
Opening Nautica Routers
300275-D Rev. 00
1-3
Closing the Nautica 4000
After the module has been installed into the Nautica 4000 (refer
to the relevant module chapter within this manual), close the unit
by doing the following:
to the relevant module chapter within this manual), close the unit
by doing the following:
1.
Place the lid down over the unit about an inch short of the
front panel.
front panel.
2.
Slide the lid into place and then fasten the thumbscrews.
3.
Reconnect all network and ISDN cables.
4.
Reconnect the power cable and turn the unit on.