Nortel 4000 Guida Utente
7-7
Chapter 7 Configuring RAC Parameters
Managing Remote Access Concentrators Using Annex Manager
Figure 7-4. Show Window
6.
Select a port/channel type and port/channel number.
If you selected parameter groups that require port or channel
numbers, you must use these fields. See the instructions on page
7-8. If your selections do not require this information you can skip
this step.
numbers, you must use these fields. See the instructions on page
7-8. If your selections do not require this information you can skip
this step.
7.
Click
Apply
.
Values appear in the
Output
box for the parameters you selected.
The level of detail supplied depends on whether you selected the
Verbose Output
check box.