Nortel 4000 Guida Utente
Managing Remote Access Concentrators Using Annex Manager
Appendix A RAC Parameters
A-50
inactivity_timer
specifies the number of minutes that a port can remain inactive. If the timer
expires, the RAC terminates all sessions and resets the port. You can use
expires, the RAC terminates all sessions and resets the port. You can use
input_is_activity
and
output_is_activity
to define activity as input to the port or output
from the port. If you set these parameters to
disabled
, the timer runs independent
of activity. To reset a port regardless of any activity, enter a number of minutes
here, set
here, set
input_is_activity
and
output_is_activity
to
disabled
and set
port_type
to
dialin
.
inet_addr
defines the RAC IP address. This 32-bit address contains four 8-bit fields
separated by periods. Each field contains a number ranging from 0 to 255 or a
hexadecimal number. The IP address always displays in decimal notation.
separated by periods. Each field contains a number ranging from 0 to 255 or a
hexadecimal number. The IP address always displays in decimal notation.
input_buffer_size
provides the number of 256-byte blocks allocated to receive input characters for
a port.
a port.
Type
Async
Values
0 to 255 minutes
Default
0 (timer disabled)
Lists
Async Port, Idle Timer, Modem, Modem Internal
Type
RAC
Values
For each field: 0 to 255 or hexadecimal
Default
n/a
Lists
RAC Only, Basic RAC
Type
Async
Values
1 to 255
Default
1
Lists
Async Port, Flow Control