Nortel 4000 Guida Utente
A-85
Appendix A RAC Parameters
Managing Remote Access Concentrators Using Annex Manager
ps_history_buffer
is used with the
Telnet
command to indicate how much incoming data a slave
port keeps in a buffer. Incoming data is buffered continuously before, during,
and after the Telnet session. Reset the port after changing this parameter value.
and after the Telnet session. Reset the port after changing this parameter value.
redisplay_line
defines the reprint line character for CLI users.
remote_address
contains the IP address for a host at the other end of the serial line. This parameter
works only when the mode parameter is set to
works only when the mode parameter is set to
autodetect
,
slip
or
ppp
.
reset_idle_time_on
defines whether input or output resets the idle timer. The idle time is the time
lapse between activity and inactivity at the device. This parameter works with
the
lapse between activity and inactivity at the device. This parameter works with
the
who
command.
Type
Async
Values
0 to 32767
Default
0
Lists
Async Ports, Basic Async Port
Type
Async
Values
+ any character
Default
+
(displays as ^R)
Lists
Async Port, Command_Line_Editing
Ctrl
Ctrl
R
Type
Async
Values
IP address
Default
0.0.0.0
Lists
Async Port, PPP, SLIP
Type
Async
Values
input or output
Default
input
Lists
Async Port, Idle Timer