Nortel 4000 Guida Utente
Managing Remote Access Concentrators Using Annex Manager
Appendix A RAC Parameters
A-88
rip_recv_version
controls the RIP versions that a RAC accepts. You can enter:
•
1
to accept version 1 packets only.
•
2
to accept version 2 packets only.
•
both
to accept version 1 and 2 packets.
rip_routers
lets you force RIP to send periodic updates to a router list instead of broadcasting
updates. You can enter the IP addresses of one to eight directly reachable routers,
or you can enter
updates. You can enter the IP addresses of one to eight directly reachable routers,
or you can enter
all
to restore broadcasting. The RAC ignores any address that
is not on an attached subnet.
rip_send_version
controls the RIP versions that a RAC sends over IP interfaces. You can choose:
•
rip-1
to send version 1 packets to the broadcast address.
•
rip-2
to send version 2 packets to the RIP multicast address.
•
compatibility
to send version 2 packets to the broadcast address
.
rip_sub_accept
controls whether subnet routes are accepted over the SLIP, PPP, and Ethernet
interfaces. You can enter
interfaces. You can enter
enabled
to accept subnet routes or
disabled
to reject
them.
Type
Interface
Values
1, 2, both
Default
both
Lists
Enet Port, Async Port, Routing
Type
RAC
Values
IP address, all
Default
all
Lists
RAC Only, Routing
Type
Interface
Values
1, 2, compatibility
Default
compatibility
Lists
Enet Port, Async Port, Routing
Type
Interface
Values
enabled or disabled
Default
enabled
Lists
Enet Port, Async Port, Routing