Nortel 4000 Guida Utente
4-19
Chapter 4 Setting Up RACs
Managing Remote Access Concentrators Using Annex Manager
Mode Box
The
Mode
box defines the type of access to a port. This box includes the
buttons:
•
Autodetect
allows a port to identify an incoming packet's
protocol and to convert to IPX, PPP, ARAP or CLI.
•
Serial
provides access to modems, serial line printers, and other
serial devices attached to the outgoing port.
•
PPP
specifies that a port can perform as a network interface
using PPP.
•
ARAP
specifies that a port can perform as a network interface
using ARAP.
•
IPX
allows dial-in Novell access.
•
Telnet
automatically connects a user to a host via the
telnet
command. You can specify the host and arguments in the
Rlogin/
Telnet
box
Argument
field.
•
SLIP
specifies that a port can perform as a network interface
using SLIP.
•
CLI
allows a port connected to a terminal or incoming modem
access to the Annex Command Line Interface (CLI). CLI
provides access to the network and connections to other hosts
via the telnet, connect, rlogin, and tn3270 commands.
provides access to the network and connections to other hosts
via the telnet, connect, rlogin, and tn3270 commands.
•
Dedicated
automatically connects a user with the host defined in
the
Dedicated
box. Once you enter a host address there, you can
choose whether the port will communicate via
telnet
or
rlogin
.
•
NDP
allows dial-in with authentication by Novell, dial-out, and
routing.
•
Rlogin
automatically connects a user to a host defined in the
Dedicated
box. You can specify the host and arguments in the
Rlogin/Telnet
box
Argument
field.
•
Other
indicates that one or more RACs you selected currently
use modes that differ from the options displayed in the
Mode
box. You can use the
Set
command in Annex Manager
Customize mode to check these values, or you can select
another option here. You cannot select the
another option here. You cannot select the
Other
button.