Nortel 1110 Guida Utente
Page 128 of 630
Nortel IP Phone 2002
553-3001-368 Standard 26.00 August 2007
First-time installation
You must first install an IP Telephony Node with the Communication Server.
For information about installing an IP Telephony Node, see Signaling Server:
Installation and Configuration (553-3001-212), or IP Line: Description,
Installation, and Operation (553-3001-365).
For information about installing an IP Telephony Node, see Signaling Server:
Installation and Configuration (553-3001-212), or IP Line: Description,
Installation, and Operation (553-3001-365).
Configuring the IP Phone 2002
to configure the IP Phone 2002 for the first
time.
Procedure 17
Configuring the IP Phone 2002
Configuring the IP Phone 2002
1
Configure a virtual loop on the Call Server using LD 97.
For more information about configuring a virtual loop, see IP Line:
Description, Installation, and Operation (553-3001-365), and Software
Input/Output: Administration (553-3001-311).
Description, Installation, and Operation (553-3001-365), and Software
Input/Output: Administration (553-3001-311).
2
Configure the IP Phone 2002 on the Call Server using LD 11.
For more information, see Software Input/Output: Administration (553-
3001-311).
3001-311).
3
Connect the IP Phone 2002 components:
a.
Connect one end of the handset cord to the handset jack on the back
of the IP Phone (identified with a handset icon).
of the IP Phone (identified with a handset icon).
b.
Connect the other end of the handset cord to the handset.
4
Choose one of the following connections:
•
For an IP Phone not sharing LAN access with a PC:
Connect one end of the CAT5 Ethernet cable to the network interface
located on the back of the IP Phone (identified with a LAN icon, see
located on the back of the IP Phone (identified with a LAN icon, see
CAUTION
Do not plug your IP Phone 2002 into an ISDN
connection. Severe damage can result.
Do not plug your IP Phone 2002 into an ISDN
connection. Severe damage can result.