Nortel 1110 Guida Utente
Page 54 of 630
Nortel IP Phone 2001
553-3001-368 Standard 26.00 August 2007
7
Power the IP Phone 2001 using either the Power over Ethernet or an AC
power transformer (local power). If you are using local power, plug the AC
power transformer into the nearest power outlet. Make sure you use the
correct AC power transformer is used. The voltage rating of the
transformer must match the wall outlet voltage. See Table 4, “IP Phone
2001 components list,” on page 49.
power transformer (local power). If you are using local power, plug the AC
power transformer into the nearest power outlet. Make sure you use the
correct AC power transformer is used. The voltage rating of the
transformer must match the wall outlet voltage. See Table 4, “IP Phone
2001 components list,” on page 49.
Note: The IP Phone 2001 supports both AC power and Power over LAN
options, including IEEE 802.3af Power Classification 2. To use Power
over Ethernet, where power is delivered over the CAT5 cable, the LAN
must support Power over Ethernet, and an AC adapter is not required. To
use local AC power, the optional AC adapter can be ordered separately.
options, including IEEE 802.3af Power Classification 2. To use Power
over Ethernet, where power is delivered over the CAT5 cable, the LAN
must support Power over Ethernet, and an AC adapter is not required. To
use local AC power, the optional AC adapter can be ordered separately.
8
to install the IP Phone 2001 for the first time
using manual configuration, or use Procedure 3 on
to install the
IP Phone 2001 for the first time using DHCP.
End of Procedure
Startup sequence
When an IP Phone 2001 is connected to the network, it must perform a startup
sequence. The elements of the startup sequence include:
sequence. The elements of the startup sequence include:
•
obtaining VLAN ID (if supported by the network infrastructure)
•
obtaining the IP parameters
•
connecting to the Call Server
•
obtaining a User ID
See Table 5 for a summary of the IP parameters and how they are obtained.
Table 5
IP Phone 2001 IP parameters (Part 1 of 2)
IP Phone 2001 IP parameters (Part 1 of 2)
Parameter
Method of Acquisition
VLAN ID
Manually entered or automatically obtained through
DHCP, and LLDP.
DHCP, and LLDP.
IP Address
Manually entered or automatically retrieved through
Partial or Full DHCP.
Partial or Full DHCP.