Lowrance 3200 Guida Al Funzionamento
50
To transfer data
from the MMC to the GlobalMap 3200: press →
to
L
OAD
|
ENT
.
3.
Saving to MMC: To accept the default name "Data" for the GPS
Data File, press
↓ to
S
AVE
D
ATA
|
ENT
. If you wish to rename the file (as
shown in the following figures), press
ENT
to activate the selection box.
Press
↑ or ↓ to change the first character, then press → to the next
character and repeat until the name is correct. Then, press
ENT
|
↓ to
S
AVE
D
ATA
|
ENT
.
The GlobalMap 3200 will display first a progress then a completion
message when the data transfer is finished. To return to the Page view,
repeatedly press
message when the data transfer is finished. To return to the Page view,
repeatedly press
EXIT
.
From left to right, these figures show the menu sequence for naming
and saving a GPS Data File from the GlobalMap 3200's memory to an
and saving a GPS Data File from the GlobalMap 3200's memory to an
MMC.
4.
Loading to unit memory: There may be more than one GPS Data
File (*.USR) on the card. To select a file, press
ENT
to activate the selec-
tion box, use
↓ or ↑ to highlight the file, then press
ENT
to accept the
selection. Next, press
↓ to
L
OAD
|
ENT
. The GlobalMap 3200 will display
a completion message when the data transfer is finished. To return to
the Page view, press
the Page view, press
EXIT
|
EXIT
|
EXIT
|
EXIT
.