Extreme summit1 Guida Utente

S

UMMIT

 S

WITCH

 I

NSTALLATION

 

AND

 U

SER

 G

UIDE

8-9

C

ONFIGURING

 Q

O

S

The following ingress mode example modifies an existing QoS profile and applies it to a 
VLAN traffic grouping. The priority parameter, although required, is ignored when 
configuring a default QoS profile in ingress mode.

config qosprofile qp4 minbw 15% maxbw 100% priority high

config vlan sales qosprofile qp4

This egress mode example does the following:

Configures the QoS mode and devicemode of the switch.

Creates a QoS profile mktgqos, with the following characteristics:

minimum bandwidth = 0%

maximum bandwidth = 10%

priority = low

Applies the QoS profile mktgqos to a range of IP addresses.

The steps to configure this example are as follows:

Configure the switch for the egress mode, by typing the following:

Reboot the switch.

Configure the switch for the correct devicemode, by typing the following:

Reboot the switch.

Create and configure the QoS profile mktgqos,, by typing the following:

Apply the QoS profile to a range of IP addresses, by typing the following:

Summit.bk : 8QOS.FM  Page 9  Thursday, June 18, 1998  9:27 AM