Intermec 3010 Istruzione Sull'Installazione

8

MaxiScan 3300 – Installation Guide – Edition 2.0

1  Before you start

❏

MaxiScan 3010 

Installation Guide

❏

MaxiScan 3010 network cable

❏

MaxiScan 3010 cable terminator

❏

MaxiScan 3010 download cable

Integration considerations

Make sure the operating environment is suitable for your
MaxiScan 3300 model, as prescribed in Section 8—

Technical

characteristics.

High-density bar codes require a shorter reading distance than
low-density bar codes. Reading distance is less critical for me-
dium density bar codes (see 

Reading distance  in Section 8—

Technical characteristics).

To optimize reading efficiency, use EasySet to activate an
optimization filter when you set up your MaxiScan. There are
filters for barcode density, contrast and reading distance. If you
have problems reading a barcode, try a different filter.

Test the setup before you install the MaxiScan permanently.

Use standard symbologies best suited to your application. Some
symbologies (Interleaved 2 of 5 for example) are less reliable
than others.

Use as few symbologies as possible.

The use of fixed barcode lengths and check digits increases
reading ef ficiency and security.

An external input synchronization device can be used to
activate the MaxiScan 3300. This will ensure longer life for the
motors and the laser diode, and allow you to detect unsuccessful
read attempts.

Slightly skew the scanner or labels to avoid 90° specular reflection
(label exactly perpendicular to scanner) in any part of the scan.

A good read usually requires a minimum of 5 scans.

Remember to take into account the length of the operating
cables and power supply cable when you install your
MaxiScan 3300.Remember to take into account the length of
the operating cables and power supply cable when you install
your MaxiScan 3300.