Citel 6000 Guida Utente
PBXgateway
™
& EXTender
TM
6000 System Administrator’s Guide
109
Customizing Individual Ports (Gateway and Remote)
The system administrator can customize each individual port for phones connected to the
Remote unit. The following parameters are described:
Remote unit. The following parameters are described:
• Description (See page 131)
• Auto-Connect
• ATA (Merdian only)
• User ID (See page 68)
• Password
• Banner
• Line Signaling (Norstar only)
• Phone Features – Active Call Monitoring (Norstar Only) See page 116.
• Logout (Avaya only) See page 111.
• MSB Key (Merdian only) See page 111.
• More
• Auto-Connect
• ATA (Merdian only)
• User ID (See page 68)
• Password
• Banner
• Line Signaling (Norstar only)
• Phone Features – Active Call Monitoring (Norstar Only) See page 116.
• Logout (Avaya only) See page 111.
• MSB Key (Merdian only) See page 111.
• More
Procedure
1. Access the specific Port Menu from the Main Menu using the following path:
Path: Remote->Configuration->Port->Port_x-y -> Port_x
The following menu appears:
The following menu appears:
Figure 67: Port Selection Screen
Auto Connect (Remote Only)
This feature attempts to permanently keep the Remote connected to the Gateway and prevents user from
having to press ‘1’ to connect.
1. Press
having to press ‘1’ to connect.
1. Press
the
↓ key to access the Auto Connect parameter.
2. Press
the
→ key and select, Enabled (Yes), (No), or Default. The Default setting is Auto Connect:
Disabled
3. Press
the
← key to accept changes and go back to the Configuration Menu.
4. Press
the
↓ key to the Save parameter. Press Enter to save changes to the active config (.rem) file.
5. (Meridian Only) Press the
↓ key to access the ATA parameter. Enabled (Yes), if you have an ATA
device present.