IBM 600e Guida Utente
![IBM](https://files.manualsbrain.com/attachments/f70d337d03c66895b7a6fbe0e6de3554f47d7dd3/common/fit/150/50/fb4e568062ca4d0154259807170f4c71f2c7aafa861a4d9a0eb3af958af4/brand_logo.png)
2
Open the CONFIG.SYS file with your text editor; then find the
following line:
following line:
DEVICE=C:\xxxxxx\IBMTPCD.SYS /R
Note:
xxxxxx is the subdirectory where you have installed the
CD-ROM device driver. The default subdirectory for
C:\
CD-ROM device driver. The default subdirectory for
C:\
xxxxxx is C:\CDROM.
If you cannot find the line, quit the file and go to step 4.
3
Comment out the line to change it as follows:
REM DEVICE=C:\xxxxxx\IBMTPCD.SYS /R
If the line is already commented out, quit the file and go to the
next step.
next step.
4
Open the AUTOEXEC.BAT file; then find the following line:
C:\xxxxxx\MSCDEX.EXE /D:TPCD
1 /M:15
xxxxxx is the subdirectory where you have installed the
CD-ROM device driver. If you cannot find the line, quit the file
and go to step 6.
CD-ROM device driver. If you cannot find the line, quit the file
and go to step 6.
5
Comment out the line to change it as follows:
REM C:\xxxxxx\MSCDEX.EXE /D:TPCD
1 /M:15
If the line is already commented out, quit the file and go to the
next step.
next step.
6
Exit the DOS command prompt; then reboot the system.
Chapter 8. Installing Software
129