K40 1000 Istruzione Sull'Installazione

&   R e c o m m e n d e d   P r o c e d u r e s

(MODELS:  K40-2000/1000) 

1. Consult with vehicle owner about LED location.  For best visibility, choose a mounting location as close to the vehicle

gauges as possible.

2. Check for proper clearance behind the area where the LED(s) will be installed (approximately 1”) and drill a 3/16” hole 

in the chosen location for the LED(s). K40-2000 models require the mounting of a second LED for rear radar warnings 
(see diagram A1).

3. If using the optional bi-color city/highway LED, choose a mounting location in the dashboard area that is below the 

driver's line of sight.

4. Check for proper clearance behind the area (approximately 1”), and drill a 19/64” hole for the bi-color LED location. 

Insert the LED into the drilled location and fasten it in place with the provided barrel fastener (see diagram A2).

5. Route all LED wires under the dash per diagram A3, and connect according to the separately enclosed block 

wiring diagram.

1"

1"

(MODELS:  K40-2000/1000) 

1. Use the provided double stick "O" ring tape to mount the piezo

speakers.

2. For maximum audio output and concealment, mount the front

piezo speaker in the driver's left air vent. Mount the rear piezo
speaker in the driver's right air vent. 

3. Route the piezo speaker zip cord wires through or under the dash

and connect according to the separately enclosed block wiring
diagram (see diagram B1).