Fedders a6p09s2a Manuale Utente

• Plug unit only into grounded

electrical outlet.

• Do not use an extension cord or

plug adapter with this unit.

• Do not operate unit with filter

removed. 

• Failure to follow these precautions

could result in electrical shock, fire
or personal injury.

• Do not alter cord or plug end. Do

not remove warning label on cord.

Your unit will operate on any 115

volt, 3-pronged (grounded) 60 Hz
circuit. A separate line is not required,
but it is advisable not to overload the
circuit with heavy duty appliances such
as washing machines, etc. 

For your safety, this unit is equipped

with a 3-pronged, grounding plug and
must be plugged into a properly
grounded outlet. If your outlet is not
of the proper type, it is your
responsibility to have the outlet and
wiring changed to the correct type. Do
not cut off the third (grounding)
prong. Do not use an adapter.

Three-prong grounding plug.
Do not alter plug end.

Single outlet grounding
wall receptacle

Grounded three-prong wall
receptacle

•  Do not store or use gasoline or other

flammable vapors and liquids in the
vicinity of this or any other appliance.
The fumes can create a fire hazard or
explosion.

•  Do not introduce objects in the air

discharge area. This could cause
permanent damage to your unit.

•  Do not pour liquids on the air

conditioner as this could cause a
malfunction. With the unit
unplugged, use a damp cloth for
cleaning  your unit. This unit does
not require water or ice to be added.

•  Avoid using strong solvents to clean

the air conditioner. 

•  Clean the air conditioner filter every

two weeks to avoid overheating
caused by air obstruction. Do not
operate without filter.

•  Do not obstruct the air intake area of

your air conditioner, as this could
cause overheating, thus activating
the unit’s security switch and shutting
off the unit.

•  Do not block air circulation to

exhaust tube when in use.

•  Do not block air flow inside with

blinds, curtains, or furniture.

A

A

B

B

C

C

125V
15A  

115V, 60HZ
AC Only 1-Phase

3-Prong Grounding Type
125 V, 15 Amp

#14 (A.W.G.) 3-Wire
Use Copper Wire Only

15 Amp Time Delay Fuse
or Circuit Breaker

• Do not remove or modify this plug
• Do not use as an on/off switch
• Do not use outdoors
• Do not push furniture against or place

furniture on the electrical cord. This can
trip the test switch and/or damage the
cord and become a potential condition
for arcing

•  Do not attempt to repair the cord. If the

cord requires replacement, call an
authorized servicer.

• The Arc Detection Device is not a

Ground Fault Interrupter and should not
be used as such

• The Arc Detection Device contains an

electronic circuit board and should not
be submerged or exposed to water spray

Resetting
If the Arc Detection Device has tripped,
the reset button will pop up. 
Follow these steps to reset the Arc
Detection Device:
1. Unplug unit from electrical outlet
2. Press the reset button
3. Plug the unit back into electrical outlet
4. Check to see if power has returned to
the unit
Testing
You should test the Arc Detection Device
equipped power cord monthly, after every
major electrical storm, or if power to your
Room Air Conditioner has been
interrupted. 
Follow these steps to test the Arc
Detection Device:
1.  Unplug unit from electrical outlet
2.  Press the reset button
3.  Plug the unit back into electrical outlet
4.  Press test button. Unit should trip and
reset button will pop up.
5.  Press reset button again for use
If above test fails, stop using the air
conditioner and contact customer service
by calling the following toll-free number: 
1-800-332-6658
or email: customerservice@fedders.com

The power cord supplied with this air
conditioner is equipped with an Arc
Detection Device designed to shut off
power to the unit when it senses an arc
fault condition. An arc fault is an
unintentional electrical discharge that
occurs when electrical products or wires
are damaged, aged, or improperly used.
An arc fault can be potentially hazardous
if left undetected.