Fedders a6x05f2e Manuale Utente

Room Air Conditioner

3

Foam Seal

Lower
Window Sash

5/8” Wood Screws

Wood Sill

Filler Panel Tab

Nails / Screws

L-Bracket

8. Cut foam seal to width of window and install between

upper and lower window sash (Fig. 4).

Caution: Do not drill a hole in bottom pan. Unit is designed
to operate with approximately 1/2” of water in bottom pan. 

(Do not attach filler panels for this application)

1. Refer to steps 1 and 2 of preceding instructions. 

2. Close window until it touches behind top bar (Fig. 4).

3. Fasten lower window sash to window frame using

finishing nails, wood screws, or “L” brackets (Fig. 5).

4. If filler is required on sides of air conditioner, cut foam

seal to size and fill both sides.

5. Cut foam seal to width of window and install between

upper and lower window sash (Fig. 4).

3. To overcome storm window interference, securely attach

2” wide wood strips to the window stool and sill, with
screws. Strips should be as long as window opening and
flush with back side of stool. Thickness of strips should be
controlled by amount of interference (Fig. 3).

4. Keeping a firm grip on air conditioner, carefully center air

conditioner in window opening with the bottom bar
between the window stool and the angle bracket. Air
conditioner should slant slightly downward on the
outside as shown by half a bubble off on a carpenters
level. This outward pitch prevents water from entering
the room (Fig. 3).

5. Close the window until it touches behind air conditioner

top bar. Slide filler panels outward until they touch
window sash tracks. (Do not release grip on air
conditioner until lower window sash is in final position)
(Fig. 3).

Bracket

Upper 
Window Sash

Wood Strips
(optional)

Lower 
Window Sash

Top bar

Bottom
bar

Level

6. Secure top of filler panels by driving 5/8” long wood

screws into window sash through mounting holes in top
slides.

7. Secure bottom of filler panels by driving 5/8” long screws

into window sill through filler panel tabs.