Fedders b6k32e7a Guida Al Funzionamento
2
ELECTRICAL REQUIREMENTS & SAFETY PRECAUTIONS
IMPORTANT SAFETY INSTRUCTIONS
Warning
Electrical Shock Hazard
• Plug unit only into grounded electrical outlet.
• Do not use an extension cord or plug adapter with this unit.
• Do not operate unit with decorative front or filter removed.
• Failure to follow these precautions could result in electrical shock, fire or
personal injury.
• The air conditioner has a serial plate rating of 230 volts. It must have its own
fuse or circuit breaker, and no other device or unit should be operated on
that fuse or circuit breaker.
that fuse or circuit breaker.
• We recommend that a qualified electrician install unit in accordance with the
National Electrical Code and local codes and ordinances.
• Do not operate this air conditioner without proper time delay circuit
protection (circuit breaker or fuse). Refer to serial plate for proper power
supply requirements.
supply requirements.
• Use copper conductors of correct wire gauge and protector size only.
• Do not alter cord or plug end. Do not remove warning label on cord.
Important Grounding Requirements
•Air conditioner has a three-prong grounding plug on the power supply cord,
which must be plugged into a properly grounded three-prong wall receptacle
for your protection against possible shock hazard.
for your protection against possible shock hazard.
•Use a single outlet grounding type wall receptacle to match the cord plug.
(Fig. 2)
Three-prong grounding
plug.
Do not alter plug end.
plug.
Do not alter plug end.
Single outlet grounding wall
receptacle
receptacle
Additional Safety Precautions
• Do not cut, alter or remove any of the expanded polystyrene (styrofoam)
inside this air conditioner.
• Do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other appliance. The fumes can create a fire hazard or
explosion.
explosion.
• Do not introduce objects in the air discharge area. This could cause
permanent damage to your unit.
• Do not pour liquids on the air conditioner as this could cause a malfunction.
With the unit unplugged, use a damp cloth for cleaning your unit.
• Avoid using strong solvents to clean the air conditioner.
• Clean the air conditioner filter every two weeks to avoid overheating caused
by air obstruction. Do not operate without filter.
• Do not obstruct the air intake area of your air conditioner, as this could cause
overheating, thus activating the units security switch and shutting off the unit.
• Do not block air circulation to outside louvers of cabinet.
• Do not block air flow inside with blinds, curtains, or furniture, or outside with
shrubs, enclosures, or other buildings.
• Do not run the air conditioner with an outside protective cover in place. This
could result in fire or mechanical damage within the air conditioner
.
A
A
B
B
RECOMMENDED CIRCUIT
WIRE SIZES
(As installed per building code) :
PROTECTOR SIZE
WIRE GAUGE
30 AMP
#10 MINIMUM
250V
30A
1
2