Fedders b6y12f2a Guida Al Funzionamento
OPERATION
REMOTE / AIR FILTER
7
Cleaning the Air Filter
Clean the filter every two weeks
1.
Turn Master Control to OFF.
2.
Remove the air filter by opening the air intake panel on the decorative front and
pull it out of the unit.
pull it out of the unit.
3.
Wash in hot soapy water, rinse and shake dry.
4.
Replace the filter, with the front of the filter toward you.
5.
To dry the filter thoroughly, run your unit for a few minutes. Remember, only a
clean filter works properly and delivers top efficiency at every setting.
clean filter works properly and delivers top efficiency at every setting.
Note: Failure to keep air filter clean will result in poor air circulation.
DO NOT operate without filter. This can render the unit inoperative.
DO NOT operate without filter. This can render the unit inoperative.
Proper use and care of your air conditioner will help ensure longer life of the
unit. It is recommended to annually inspect and clean the coils and condensate
water passages. Expense of annual inspection is the consumer’s responsibility.
unit. It is recommended to annually inspect and clean the coils and condensate
water passages. Expense of annual inspection is the consumer’s responsibility.
Filter
Louvers
Vent door
A
C
C
B
A
B
Air Circulation Without Cooling or Heating
1.Close vent door.
2. Turn Master Control to HI FAN.
2. Turn Master Control to HI FAN.
Exhaust Operation Without Cooling or Heating
1.Open vent door.
2. Turn Master Control to HI FAN.
2. Turn Master Control to HI FAN.
Caution:
If air conditioner is shut off,
wait a minimum of three
minutes before restarting.
If air conditioner is shut off,
wait a minimum of three
minutes before restarting.
Directing Airflow
Unit is engineered with adjustable louvers to direct discharge airflow. Louvers are
manually adjusted by moving levers in direction of desired airflow.
manually adjusted by moving levers in direction of desired airflow.
The functions work the same as your air conditioner’s
touch controls.
touch controls.
Air Conditioner Remote Control
AAA
IEC R03
1.5V
+
-
AAA
IEC R03
1.5V
Remove the back cover
and insert the batteries
with the poles (+) and (-)
in the correct position.
and insert the batteries
with the poles (+) and (-)
in the correct position.
CAUTION:
• Use only AAA or IEC R03 1.5V batteries.
• Remove the batteries if the remote controller is not used for a
• Use only AAA or IEC R03 1.5V batteries.
• Remove the batteries if the remote controller is not used for a
month or longer.
• Do not attempt to recharge the supplied batteries
• All batteries should be replaced at the same time.
• Do not dispose of the batteries in a fire as they may explode.
• Do not mix old and new batteries.
• Do not install the batteries with the polarity (+/–) reversed.
• Keep batteries and other objects that could be swallowed
• All batteries should be replaced at the same time.
• Do not dispose of the batteries in a fire as they may explode.
• Do not mix old and new batteries.
• Do not install the batteries with the polarity (+/–) reversed.
• Keep batteries and other objects that could be swallowed
away from young children. Contact a doctor immediately if an
object is swallowed.
object is swallowed.