Roper fep310kw Istruzione Sull'Installazione
6
Electrical Connection
Power Supply Cord
Direct Wire
1. Disconnect power.
2. Remove the terminal block cover screws located on the back
2. Remove the terminal block cover screws located on the back
of the range. Pull cover down and toward you to remove cover
from range.
from range.
3. Complete installation following instructions for your type of
electrical connection:
4-wire (recommended)
4-wire (recommended)
3-wire (if 4-wire is not available)
Electrical Connection Options
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use a new 40 amp power supply cord.
Plug into a grounded outlet.
Failure to follow these instructions can result in death,
fire, or electrical shock.
fire, or electrical shock.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge copper or 6 gauge aluminum wire.
Electrically ground range.
Failure to follow these instructions can result in death,
fire, or electrical shock.
fire, or electrical shock.
A. Two mounting tabs each side
B. Terminal block cover
B. Terminal block cover
C. Hex-head screws
A
B
C
If your home has:
And you will be
connecting to:
connecting to:
Go to Section:
4-wire receptacle
(NEMA type 14-50R)
(NEMA type 14-50R)
A UL listed,
250-volt
minimum,
40-amp, range
power supply
cord
250-volt
minimum,
40-amp, range
power supply
cord
4-wire connection:
Power supply cord
Power supply cord
4-wire direct
A fused
disconnect or
circuit breaker
box
disconnect or
circuit breaker
box
4-wire connection:
Direct wire
Direct wire
3-wire receptacle
(NEMA type 10-50R)
(NEMA type 10-50R)
A UL listed,
250-volt
minimum,
40-amp, range
power supply
cord
250-volt
minimum,
40-amp, range
power supply
cord
3-wire connection:
Power supply cord
Power supply cord
3-wire direct
A fused
disconnect or
circuit breaker
box
disconnect or
circuit breaker
box
3-wire connection:
Direct wire
Direct wire
(12.7 cm)
5"
3"
(7.6 cm)
1"
(2.5 cm)