Lexmark W810 Guida Utente
117
Re
pl
pl
aci
n
n
g su
ppl
ies
NOTE: You can press
Go
to continue printing for a short while
after the
Replace PC Kit
message appears.
However, we
strongly recommend that you replace the items in the
photoconductor kit immediately.
photoconductor kit immediately.
If you do not, the printer
will stop operating when
Replace PC Kit To Continue
appears on the display. You will then have to replace the
photoconductor cartridge before you can continue to use
the printer.
photoconductor cartridge before you can continue to use
the printer.
Instructions for replacing the items in the photoconductor kit follow.
Replacing the photoconductor cartridge
W
ARNING
:
After you install a photoconductor cartridge in the
printer, do not remove the cartridge and reinstall it in
any other printer. Internal printer settings that vary
from printer to printer could cause the photoconductor
to overdevelop or underdevelop images, resulting in
poor print quality or possibly printer damage.
printer, do not remove the cartridge and reinstall it in
any other printer. Internal printer settings that vary
from printer to printer could cause the photoconductor
to overdevelop or underdevelop images, resulting in
poor print quality or possibly printer damage.
CAUTION:
Areas inside the printer may be hot. Avoid touching
parts inside the printer until they have cooled.
parts inside the printer until they have cooled.
1
Lift the side door latch and lower the side door (Door C).