Adaptec rs Guida Utente
5-1
Removing and Installing Components
Chapter 5: Removing and Installing Compo-
nents
This chapter deals with field replacing components in the RAIDStation7 Ultra160
SCSI Storage Array. Procedures for removing and installing components such as
hard disk drives, power supplies, ACMs, and the VEM are covered. The proce-
dure for replacing a rackmount Storage Array in a rack cabinet is also described.
SCSI Storage Array. Procedures for removing and installing components such as
hard disk drives, power supplies, ACMs, and the VEM are covered. The proce-
dure for replacing a rackmount Storage Array in a rack cabinet is also described.
Device Carrier Removal and Installation
The horizontal, rackmount position of the power supplies and hard disk drives
within the RAIDStation7 Ultra160 SCSI Storage Array is shown in Figure 5-1. In
the vertical upright position, bay 0 is on top and bay 8 is on the bottom.
within the RAIDStation7 Ultra160 SCSI Storage Array is shown in Figure 5-1. In
the vertical upright position, bay 0 is on top and bay 8 is on the bottom.
Figure 5-1. Location of Devices in Storage Array
WARNING: Before attempting to install or remove any of the components,
ensure that anti-static precautions have been taken. The minimum require-
ment is an anti-static wrist strap and grounding wire.
ensure that anti-static precautions have been taken. The minimum require-
ment is an anti-static wrist strap and grounding wire.
Pow
er
Su
pply
Power
Su
pply
Dis
k
D
rive
rive
Disk
Drive
Di
sk
sk
D
riv
riv
e
Disk Drive
Disk
Drive
Disk Drive
Di
sk
D
riv
sk
D
riv
e
Bay 0
Bay 8