Axis 210 Network Camera 10-pack 0197-024 Manuale Utente

To focus the AXIS 210, unscrew the 

focus puller on the lens. Adjust the focus 

as required. Re-tighten the focus puller.

To focus the AXIS 211, follow the instructions below. 

1. From the Basic Configurati

on page 

in the setup tools, open the Focus 

adjustment page.

2. Set the DC-Iris to Disabled and click 

Save.

3. Unscrew the zoom puller on the lens 

by turning it anti-clockwise. Adjust 

the zoom setting as required. 

Re-tighten the zoom puller.

4. Unscrew the focus puller on the lens. Adjust the focus as required. Re-tighten the focus 

puller.

5. From the Focus adjustment page, set the DC-Iris to Enabled and click Save.

The DC-Iris should always be disabled while focusing the camera. This opens the iris to its maximum, which 
gives the smallest depth of field and thus the best conditions for correct focusing. When the focus is set 
with this method it will then be maintained in any light conditions.

Focus puller

Focus puller

Zoom puller 
(Tele/wide)