Axis 210 Network Camera 10-pack 0197-024 Manuale Utente

If IPv6 is enabled, your camera will receive an IP address according to the configuration in 

the network router.

There are also options for setting up notification of changes in the IP address, and for 

using the AXIS Internet Dynamic DNS Service. For more information on setting the IP 

address, please see the online help.

• DHCP is a protocol for automatic IP address assignment on a network. IP address assignment via DHCP may 

lead to the situation where the IP address changes and you lose contact with the camera. Configure the 
options for notification of IP address change (under Services) to receive notification from the camera when 
the IP address changes.

• Alternatively, if your DHCP server can update a DNS server, you can access the AXIS 210/211 by host name 

which is always the same, regardless of the IP address.

Options for notification of IP address change - if the IP address for the video server 

changes, e.g. automatically by DHCP, you can choose to be notified of the change. Click 

Settings... and enter the required information.

AXIS Internet Dynamic DNS Service - If the AXIS 210/211 has been registered with the 

Axis Internet Dynamic DNS service and the IP address for the product changes, the service 

is updated to reflect the change. Check the box to enable/disable automatic updates.

The domain name currently registered at the Axis Internet Dynamic DNS service for your 

product can at any time be removed. To do this click Settings... and follow the 

instructions. For more information, please refer to the online help

DNS (Domain Name Service) provides the translation of host names to IP addresses on 

your network.

Obtain DNS server address via DHCP - automatically use the DNS server settings provided 

by the DHCP server. Click the View button to see the current settings.

Use the following DNS server address - enter the desired DNS server by specifying the 

following:

Domain name - enter the domain(s) to search for the host name used by the AXIS 

210/211. Multiple domains can be separated by semicolons (;). The host name is always the 

first part of a Fully Qualified Domain Name, e.g. myserver is the host name in the Fully 

Qualified Domain Name myserver.mycompany.com where mycompany.com is the 

Domain name.