Axis 210 Network Camera 10-pack 0197-024 Manuale Utente

For more infomation on Quality of Service, please see the Axis support web at 

www.axis.com/techsup

The cameras includes support for UPnP

™

, which is enabled by default. If also enabled on 

your computer, the camera will automatically be detected and a new icon will be added to 

“My Network Places.” 

UPnP must also be enabled on your Windows XP computer. To do this, open the Control Panel from the 
Start Menu and select Add/Remove Programs. Select Add/Remove Windows Components and open the 

Networking Services section. Click Details and then select UPnP as the service to add.

These settings are for the IP addresses, port numbers, and Time-To-Live values to use for 

media streams in the MPEG-4 format. Only certain IP addresses and port numbers should 

be used for these streams. For more information, please see the online help.

Your Axis network camera includes support for Bonjour. When enabled, the camera is 
automatically detected by operating systems and clients that support this protocol. 

I/O Ports - the pinout, interface support and the control and monitoring functions 

provided by this connector are described in The I/O Terminal Connector, on page 43.

The Status indicator LED on the front of the camera can be set to flash at a configurable 

interval (or to not light up at all) whenever the unit is accessed. For a listing of all LED 

The LED does not flash when the stream is retrieved using MPEG-4 multicast.

• Restart - The camera is restarted without changing any of the settings. Use this method 

if the unit is not behaving as expected.

• Restore - The unit is restarted and most current settings are reset to factory default val-

ues. The settings that will not be reset are as follows:

• the boot protocol (DHCP or static)
• the static IP address
• the default router
• the  subnet  mask