Continental dl2rfe-ss Guida Specifiche

• Modern, State-of-the-Art Styling
• Performance Rate “Plug” Refrigeration

Systems

• 3" Non-CFC Polyurethane Foam Insulation
• Chrome-Plated Flow Line Handles
• Cam-Action Lift-Off Hinges
• Self-Closing Doors
• Magnetic Snap-In Gaskets
• Cylinder Lock In Each Door
• Automatic Hot Gas Condensate Evaporator
• Adjustable 6" Stainless Steel Legs
• External Digital Thermometers
• Automatic Electric Defrost on Freezer System
• Automatic Interior Lighting

Standard (S/S Front, Aluminum Ends & Interior)
Suffix SA (S/S Exterior, Aluminum Interior)
Suffix SS (S/S Exterior & Interior)

• Half-Door

• Pass-Thru

• Remote

• Casters

• Stainless Steel

• Pan Slides

Shelves

• Correctional Facility

• Consult Factory

Package

Two “performance rated”, air cooled hermetically sealed,
capillary type refrigeration systems are installed on top of
each dual temp.  Plasticized fin coil and air circulating fans
are contained within each concealed “plug” type insulated
housing, readily accessible on the top of the cabinet and
separate from each food zone to increase food storage
capacity.  Both “plug” systems are fully charged with refrig-
erant and mounted on a sturdy steel, rail-type base which
can be easily removed.  Refrigerator sections are designed
to maintain 38 to 40 degrees Fahrenheit (3 to 5 degrees
Centigrade), and Freezer sections 0 degrees Fahrenheit (-
18 degrees Centigrade) while operating with an unrestricted
air supply in a maximum ambient temperature of 100
degrees Fahrenheit.  Freezer “Plug” systems have an auto-
matic electric defrost timer which initiates defrost cycles at
predetermined intervals.  All condensate water is evaporat-
ed by an automatic, non-electric, corrosion-resistant con-
densate evaporator.  A strict quality-assurance team
inspects all materials and components to certify that each
model conforms to the most exacting standards.  All models
are factory performance tested for a minimum of 16 hours
prior to crating.

All materials are of  top quality, assembled to conform
with strict quality-assurance requirements.  The cabi-
net front and doors are constructed of heavy-gauge
polished stainless steel for durability.  All cabinet
joints and seams are sealed vapor tight.  Case is of
all metal, welded construction and internally support-
ed and braced for a rigid unit construction.  Cabinet
design eliminates overlapping panels with raw edges.
Cabinet body, doors and plug are insulated with non-
CFC, foamed-in-place polyurethane foam with an
average thickness of 3 inches to ensure increased
energy efficiency.  Full-length louvered air grille locat-
ed above the doors allows equal air circulation to the
condensing unit.  Easily removable, low-wattage,
anti-sweat door heaters concealed by a non-metallic,
non-conductive, high-impact thermal breaker strip
eliminate condensate build-up on th cabinet front.
Automatic interior lighting is controlled by door open-
ings.  Cabinets are equipped with 6-inch adjustable
stainless steel legs.

Shelves are designed for heavy-duty use with
.306” diameter frame and brace members and
.140” diameter fill wires spaced 3/4” apart.  Shelves
are welded steel and epoxy-coated for a durable,
long, rust-free service life.  Adjustments are in 1/2
increments and a wide door opening allows the
use of a variety of optional pan and tray slide types.

Door shells are constructed of heavy gauge stain-
less steel and are internally braced and urethane-
foamed-insulated for rigidity.  Door corners are of
welded construction and polished.  REplaceable
snap-in gaskets are self-adjusting, heavy-duty,
magnetic type.  Door handles and hinges are
chrome-plated and non-corrosive.  Doors are pro-
vided with built-in cylinder locks which are keyed
alike.  Hinges are cam action, lift-off type featuring
positive safety stop at 120 degrees.